feday

Gloomhaven monster life counter and standee

by feday

Gloomhaven monster life counter and standee

A monster base for Gloomhaven (or any other tabletop) with integrated life or hit point counter. Works great in combination with the Gloomhaven monster attack deck holder

The counter rings snap into place and don't move when handling the standee.

If the thread comes loose (especially when turning counter clockwise) just use a drop of super glue...

Please make sure to read the printing instructions! The springs and threads are specific.

  • The size of the HP rings is approx 26mm.
  • The top is 25mm for basing miniatures onto.
  • The thread used in various places is a "M9x1.25 6g"

https://youtu.be/xZTU2_qF8n0

File Size Updated Download Zip
README.md 933 bytes 4 years, 2 months ago
129
v16_Base.stl 282.6 KB 4 years, 2 months ago
Preview of v16_Base.stl Preview of v16_Base.stl Preview of v16_Base.stl
149
v16_Connector_2rings.stl 439.2 KB 4 years, 2 months ago
Preview of v16_Connector_2rings.stl Preview of v16_Connector_2rings.stl Preview of v16_Connector_2rings.stl
133
v16_Connector_3rings.stl 842.0 KB 4 years, 2 months ago
Preview of v16_Connector_3rings.stl Preview of v16_Connector_3rings.stl Preview of v16_Connector_3rings.stl
131
v16_Ring.stl 224.7 KB 4 years, 2 months ago
Preview of v16_Ring.stl Preview of v16_Ring.stl Preview of v16_Ring.stl
119
v16_Spring.stl 83.1 KB 4 years, 2 months ago
Preview of v16_Spring.stl Preview of v16_Spring.stl Preview of v16_Spring.stl
151
v16_Top_Flat.stl 129.6 KB 4 years, 2 months ago
Preview of v16_Top_Flat.stl Preview of v16_Top_Flat.stl Preview of v16_Top_Flat.stl
150
v16_Top_standee.stl 507.2 KB 4 years, 2 months ago
Preview of v16_Top_standee.stl Preview of v16_Top_standee.stl Preview of v16_Top_standee.stl
110
Gloomhaven monster life counter and standee by feday is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.