Premium version of this model with two kinds of brick patterns available on my Cults3D page.
Cheer up the gloom with some stone pillars/columns with real flickering torches for all your dungeon adventures. No soldering necessary!
The base of a flickering orange tealight and a section of acrylic rod, acting as a light pipe, are used to bring the torches to life. The plastic flame cap for the tea light is also used for the torch flame.
The base printed piece is designed to fit the guts of one of the tealights listed below. Any of the three columns can fit on top and be glued or just set on top. There is an alignment notch in the printed base so pay attention when assembling with the tea light.
These are scaled up slightly from the original pillars they were remixed from with the base coming in at a little bit larger that 1.5in (38mm).
Inspired by GrimfieldGames' Gloomhaven Brick Column (hollow, room for LED-light)
Tea Lights:
- Amazon US Link
- Aliexpress Link (haven't ordered but these look right)
1/8" Dia. Acrylic Rod:
- Amazon US Link
- Aliexpress Link (enough for ~15 columns)
Links for Germany:
https://www.amazon.de/dp/B076Q6LY2Q/ref=cm_sw_r_wa_apap_h2MAQKWf5221t
https://www.amazon.de/dp/B01MSN6Z4D/ref=cm_sw_r_wa_apa_-UQgCbVH1G0PC
