Printing at 20% infill with 1.0 or 0.6 layer height is recommended.
If you want to move the arms you can use a hair dryer or heat gun to put it in any position you want.
Let me how it printed
Printing at 20% infill with 1.0 or 0.6 layer height is recommended.
If you want to move the arms you can use a hair dryer or heat gun to put it in any position you want.
Let me how it printed
| File | Size | Updated | Download Zip | |
|---|---|---|---|---|
| otyugh_by_Hyena_Lobster.stl | 159.9 MB | 4 years, 11 months ago |
|
116 |
|
|
||||